Con la normativa actual un reloj puede tener el Swiss Made y la mitad de sus componentes fabricados en China, la India o donde sea.
Tiro de la wiki:
"Swiss watch A watch is considered Swiss, according to the Swiss law if:
- its movement is Swiss and,
- its movement is cased up in Switzerland and;
- the manufacturer carries out the final inspection in Switzerland
[h=4]Swiss watch movement[/h] A watch movement is considered Swiss if:
- the movement has been assembled in Switzerland and,
- the movement has been inspected by the manufacturer in Switzerland and;
- the components of Swiss manufacture account for at least 50 percent of the total value, without taking into account the cost of assembly.
If a watch movement is intended for export and will not be cased-up in Switzerland, but it otherwise meets the criteria to be considered a Swiss movement, the watch may say "Swiss Movement" but it may not say Swiss Made on the watch case or dial.
A watch that says "Swiss Quartz" is considered to be a proper Swiss watch. However, it is often improperly used by foreign manufacturers to merely indicate that the quartz movement is of Swiss origin.[SUP]
[2][/SUP]
[h=3]The 50% Rule for Swiss Made watches[/h] Use of the Swiss Made label for watches is covered by an ordinance of the Federal Council dated 29 December 1971. The Swiss standard is often pejoratively referred to as the 50% Rule. However, it has its basis in real life economics. Again, the law merely sets forth a minimum standard. The famous or infamous Swiss Made Ordinance has, for a number of years, been subject to many criticisms, particularly inside the industry, because it is considered too lax, but also in legal circles, where the view is that it no longer fully meets the legal mandate specified in the companion law on trademarks (
SR 232.11).
“It is not generally known that quite a few Swiss companies have watches assembled in China for export to North America, Asia and even Europe, where the brand name is more important than the “Swiss made” label. Such watches may consist of a Chinese case and a Chinese crystal, a Taiwan-made dial and metal bracelet and Japanese hands. If the movement is to be considered Swiss, 51% of its value must be Swiss and at least the last wheel must be added in Switzerland. Swiss watch brands without the “Swiss made” label are usually equipped with a Japanese movement. The “Swiss parts” label means that the movement is assembled in Asia using kits consisting at least partially of Swiss made components.”
[SUP]
[3][/SUP][SUP]
[4][/SUP]
From time to time namely in 2003 and more particularly in 2007, there are efforts made to strengthen the definition of "Swiss made." These efforts are normally spearheaded by the
Federation of the Swiss Watch Industry FH (FH) a trade organization."
Y a ver si dejamos de engañarnos al solitario. El hecho de que medio reloj ( creo que en la práctica será más de medio) está fabricado en China o Azerbajan no significa nada, no es bueno ni malo. Es un hecho de mercado. Globalización, ley oferta y demanda, abaratamiento de costes y todas esas historias... es lo que hay.
Eso ni da ni quita a la marca, que a mi personalmente es de las que más me gusta en el panorama relojero, por historia, calidad y relación calidad/precio.