Sigo diciendo lo mismo. Muy en la parte inferior pero Los agujeros no estan tocando el borde como para que temer que se vaya a escapar el pasador.
El problema que se publicó en algunas cajas 150 del SEII no aparece en este y otro que tengo.
Y Yo, de momento estoy en el mismo "lio" "aparentemente resuelto"que tambien han reportado en WUS:
"PS - as an update on the watch, about 2 minutes after I wrote on here that "it arrived faultless" the date mechanism failed. It is now stuck between 14/15 and won't shift. I really don't want to take this one apart either.
Before you send it back, one thing you could try is just to give the watch a couple of sharp taps with your knuckles. I know it sounds crude, but I have found that the quick-set (so called) date can be prone to sticking when you try and quick set it - and the date wheel lodges between dates. A couple of sharp knocks can be just enough to jiggle it and make it snap back into one or other position - from where you should be able to adjust it to the correct date again. Had to do this to mine - seems to be a "feature".
It's called "percussive maintenance"
TRADUCTOR DE GOOGLE MEDIANTE:
PD: como una actualización del reloj, unos 2 minutos después de que escribí aquí que "llegó sin errores", el mecanismo de fecha falló. Ahora está atrapado entre 14/15 y no cambiará. Realmente tampoco quiero desarmarlo.
Antes de devolverlo, una cosa que podría intentar es simplemente darle al reloj un par de golpes agudos con los nudillos. Sé que suena crudo, pero he descubierto que la fecha de establecimiento rápido (así llamada) puede ser propensa a quedarse pegada cuando intentas establecerla rápidamente y la rueda de fecha se almacena entre las fechas. Un par de golpes agudos pueden ser suficientes para sacudirlo y hacer que encaje en una u otra posición, desde donde podrá ajustarlo nuevamente a la fecha correcta. Tuve que hacer esto a la mía, parece ser una "característica".
Se llama "mantenimiento de percusión"